Wizord 4 Electric Fence Energiser

The Wizord 4 Electric Fence Energiser is a single-zone electric fence energiser designed to supply high-voltage pulses to an electric fence system. It provides 3.7 joules of output energy into a 500-ohm load, with an open-circuit output voltage of 8,000 V. The unit includes high-voltage and earth-loop monitoring, a tag switch for control, gate and panic-button inputs, alarm outputs, mains power and battery backup support. It is suitable for electric fencing applications where controlled energisation and fence monitoring are required.

Product Features

3.7 Joule Output Energy

The Wizord 4 delivers a typical output energy of 3.7 joules into a 500-ohm load, providing the electrical pulse required to energise a compatible electric fence system.

Single-Zone Fence Monitoring

The energiser provides one monitored high-voltage zone and one monitored earth loop, allowing the unit to monitor the fence and earth circuits for relevant fault or tampering conditions.

High-Voltage and Earth Wire Monitoring

Built-in monitoring checks the high-voltage and earth fence circuits. The system can generate an alarm condition when relevant tampering or fault conditions are detected.

Tag Switch Control

A tag switch is provided for controlling the energiser without requiring a keypad. This gives the user a straightforward method of controlling the unit.

Gate Monitoring Input

The Wizord 4 includes a timed gate-switch input for monitoring the opening and closing of a gate connected to the electric fence system.

Panic Button Input

A panic-button input is provided as part of the energiser’s alarm and monitoring connections.

Siren and Strobe Outputs

The energiser provides an alarm output for a siren and a strobe-light output for visual indication of an alarm condition.

Battery Backup Support

The Wizord 4 operates from mains power and supports a built-in battery backup system. This provides an alternative power source when mains power is unavailable, subject to the installed battery configuration.

Lightning and Power Surge Protection

The unit incorporates lightning and power surge suppression to help protect the energiser against electrical surge conditions.

Intelligent Power Saving

The Wizord 4 incorporates an intelligent power-saving function designed to reduce energy consumption and help conserve battery power.

Remote Control Connectivity

The energiser provides a remote on/off input and can be connected to an armed-response radio or GSM module as part of an appropriately configured electric fence security system.

Product Specifications

• Product: Wizord 4 Electric Fence Energiser
• Product code: EL-FN-ENZ4M
• Typical output energy: 3.7 J into 500 ohms
• Open-circuit output voltage: 8,000 V
• High-voltage monitored zones: 1
• Earth-loop monitored zones: 1
• Power supply: 240 V mains
• Typical power consumption: 18 VA
• Control: Tag switch
• Remote on/off input: Yes
• Gate switch input: Yes
• Panic button input: Yes
• Siren output: Yes
• Strobe output: 1
• Battery backup: Supported
• Fence interference detection from foreign energisers: Yes
• Multi-energiser network: No
• Adaptive Power Technology (APT): No
• Standards listed: IEC 60335-2-76; CISPR 14; EN 61000
• Dimensions: 180 x 205 x 120 mm