Brother HS2-611 6mm Black on Yellow Heat Shrink Tube Label Tape

The Brother HS2-611 is a heat-shrink tube label tape designed for identifying cables and wires with compatible Brother P-touch industrial label printers. It uses a yellow heat-shrink tube with black printing and is approximately 5.8mm wide and 1.5m long. The printed tube is placed over a cable and heated so that it shrinks around the cable, providing a dedicated format for cable identification. HS2-611 is listed in HS2 heat-shrink tube documentation for compatible P-touch systems.

Product Features

Heat Shrink Tube Format

Unlike conventional adhesive label tape, HS2-611 is supplied as a heat-shrink tube. The printed tube is placed over the cable and heated to shrink around it, making it suitable for cable and wire identification.

Black on Yellow Printing

The tape uses black printing on a yellow tube, providing a high-contrast format for cable identification.

Approximately 5.8mm Width

HS2-611 is listed with a tube width of approximately 5.8mm. Product documentation identifies this size within the HS2 heat-shrink tube range.

1.5m Length

The HS2-611 heat-shrink tube is supplied in a 1.5m length according to the available HS2 product documentation.

Designed for Cable Identification

The heat-shrink format is intended for marking and identifying cables and wires, making it suitable for electrical, telecommunications, networking, control-panel, and installation work.

Heat-Activated Shrinking

After printing, the tube can be positioned over the cable and heated using an appropriate heat source so that it shrinks around the cable.

Industrial Labelling Applications

The HS2 format is intended for professional cable and wire identification applications and is compatible with P-touch label printers that support HS or HSe tapes.

Product Specifications

• Brand: Brother
• Product Code: HS2-611
• Product Type: Heat-shrink tube label tape
• Tube Colour: Yellow
• Print Colour: Black
• Print Format: Black on yellow
• Width: Approximately 5.8mm
• Length: 1.5m
• Material: Heat-shrink tube
• Application: Cable and wire identification
• Label Format: Heat-shrink tube
• Adhesive: Non-adhesive heat-shrink tube format
• Printing Technology: Thermal transfer, depending on the compatible printer
• Compatibility: Compatible P-touch label printers supporting HS or HSe heat-shrink tubes
• Cable Size: Confirm the required cable diameter against the specific HS2-611 specifications before installation